Note: This is a continuation of Building a new (old) PC – Part 1
This process brought back a lot of memories. Not all of them were good. I was expecting some warm and fuzzies. The “Getting Ready to Start Windows for the First Time!” kind of warm and fuzzies. What I got were lots of cuts on my hands, a few hours worth of research, incompatibilities, hardware failures…and the satisfaction of a job well done.
I built the board/CPU/RAM and video on my test bench first. To begin, I inserted the processor into the slot, tightening the retaining screws. Then came RAM (it was exactly like modern RAM). Finally, I plugged in the RIVA TNT and hooked up power and keyboard/mouse. A quick short of the jumpers and everything came alive. So far, so good?
For whatever reason, the system didn’t like the PS/2 keyboard I had plugged in. It didn’t throw a keyboard error, but I couldn’t use it to get into the BIOS. It wouldn’t even light up. I tried another and I had the same results. I finally switched to a USB keyboard (thankfully the 440BX has USB ports) and had no further issues. The mouse worked fine in the PS/2 port, so I guess it’s probably just a bad keyboard port.Continue reading →